Saturday, December 31, 2011

Crystal Pond Professional Waterfall Pump Model WFP5100

!: New Crystal Pond Professional Waterfall Pump Model WFP5100 for sale

Brand : Beckett | Rate : | Price : $185.16
Post Date : Jan 01, 2012 03:05:24 | Usually ships in 24 hours


  • Energy efficient seamless design
  • Thermal protection to prevent burnout
  • Can be used horizontally or vertically
  • Easy to install
  • Fits large waterfalls

More Specification..!!

Crystal Pond Professional Waterfall Pump Model WFP5100

Playtex Straw Cup For Sale

Monday, December 26, 2011

Building a Low-Maintenance Water Garden, Without the Pond- Introducing the Pond-Less Waterfall

!: Building a Low-Maintenance Water Garden, Without the Pond- Introducing the Pond-Less Waterfall

For those of you who want to have a professional backyard pond but don't want to have to worry about maintaining a large body of water, a pond-less waterfall is the solution for you. Without the pond, you don't have to worry about algae control, water filtration, and keeping animals and young children away from your body of water. Instead, you can create the relaxing, and soothing sound of falling water, while leaving your neighbours baffled as to how water can literally fall from nowhere.

The trick behind building a pond-less waterfall lies in the pump vault. The pump vault is a construction which houses your pump, and helps to collect the water from the waterfall. Before embarking on this project, however, you will need an adequately sized liner. The duty of EPDM liner is to keep the water contained within your "pond", in order to prevent water loss. The liner must be sufficiently large to contain the entire pump vault, and to be laid out all the way from the pump vault to the top of the waterfall. Both the pump vault and the liner is usually obtained as part of a pondless waterfall kit (which would also include the pump and biological waterfall filter), such as the one offered by Algreen Products.

After a liner is obtained, a hole for the pump vault must be dug. A 5' x 5' x 2' hole should suffice for most pump vaults. Next, the waterfall must be built up by creating a mound of dirt and rocks. The top of the mound should have space for a biological waterfall filter, which would not only filter the water, but also release the water unto the top of the waterfall from its lip. Liner can now be lain out, starting from the pump vault hole, all the way up to the top of the waterfall, where the biological waterfall resides.

The final step of the installation procedure is to insert the pump into the pump value, connect the pump to the biological waterfall filter, and to close the lid on top of the pond vault. Now you can fill the area surrounding the pump vault with pebbles. With the addition of the pebbles, it will seem like the water from the waterfall is falling directly into the ground!


Building a Low-Maintenance Water Garden, Without the Pond- Introducing the Pond-Less Waterfall

Chocolate Coins Candy Spies of the BalkansA Novel by Alan Furst

Wednesday, December 21, 2011

Sunterra 202000 Pond Pump 2000 GPH, Black

!: Brand new Sunterra 202000 Pond Pump 2000 GPH, Black buy online

Brand : Sunterra
Rate :
Price : $88.00
Post Date : Dec 21, 2011 15:50:24
Usually ships in 24 hours



The pump is at the heart of a water garden. Without it, water will not circulate to create a healthy and balanced ecosystem. Sunterra pumps circulate water to help prevent breeding conditions for unwanted insects while oxygenating it for plants and fish. Pumps are distinguished by the gallons per hour they produce at one foot of lift or head. All Sunterra pumps are submersible and must be placed in water to function properly. Direct Drive pumps are more powerful and provide higher GPH output than magnetic drive pumps. These pumps are energy efficient, water cooled and use no oil. Direct Drive pumps are designed for use in dirty water applications where the possibility of water impurities is high. All Sunterra pumps are 100% water tested and have a 25 foot power cord. The pump is 2000 gallons per hour and has a maximum lift of 23 feet. This pump can handle a larger volume of water and can be used in large water garden applications and those containing waterfalls.

Pamper Swaddlers Coupon Quickly

Saturday, November 26, 2011

Summer Pond Tips

!: Summer Pond Tips

Low Oxygen levels Kill Fish

Use an oxygen tester and air stones to keep your available

oxygen level to at least 7.0 parts per million of dissolved

oxygen in 90 degree F. water. Koi and goldfish start showing

signs of stress at oxygen levels of 4.0 ppm and will start

dying at 3.0 ppm. The higher the water temperature goes the

less oxygen that's available. Water temperatures over 90

degrees will also affect fish health so keep the temperature

under control by providing shade during the hottest parts of

the day.

It's Parasite Season

Warm water causes an increase in parasites such as anchor

worms, fish lice or flukes. Some parasites such as anchor worm

and fish lice are visible and can be treated with Dylox,

Dipterex or Masoten.

Invisible parasites such as external protozoa and flukes can

not be seen but they usually cause symptoms including extra

thick mucus, constant scratching by rubbing against objects,

flashing, or jumping. Some variations will cause a noticeable

head shaking and yawning. COntact your pond specialist for

treatments because different symptoms are indicative of

different infections. Follow label instructions at all times

or you could cause serious injury or death to your fish.

Summer Koi Feeding Tips

If you water is between 70 to 85 F. then feed a low protein

food in a quantity that is equal to 1.0% to 1.5% of total koi

body weight in pond. Estimate total koi body weight in pond

and feed recommended % of food daily based on season and water

temperature divided into intervals of about 2-2-1/2 hours.

Takes koi about 2- 2-1/2 to digest food in warmer water and

4-8 hrs in colder water when feeding is begun. So in warmer

ideal water temperatures feed 5-8 times daily the individual

portions totaling daily amount needed. In cooler temperatures

feed 1-3 times daily.

Sunblock for your Koi

Koi are not immune from sunburn, especially in shallow ponds

that get direct sunlight. Provide shade such as water lilies

or a rock overhang. Even a beach umbrella will do in a pinch.

Watch for Evaporation

Depending upon the surface area of your pond, you can lose

several inches per day to evaporation. Monitor and adjust your

water levels daily or as neccessary. Remember, do not use

water with chlorine in it if you have fish!

Five Quick Tips For Healthy Summertime Water

1. Ensure that you have good mechanical and biological

filtration and that your pump will turn the pond water over

totally at least twice per day.

2. Operate the pump 24 hours a day.

3. Provide adequate shade by having 60 to 70% of the pond's

surface area covered with floating plants or other types of

shade.

4. Add water clarifiers and bottled bacteria if your water

remains cloudy even when good filtration is present.

5. Test oxygen levels daily and add air stones if levels fall

below 7 PPM.


Summer Pond Tips

Pampers Wetness Indicator Cheap

Wednesday, November 23, 2011

Goldfish Outdoors

!: Goldfish Outdoors

How do you build a goldfish pond outdoors?

The tools you will need are a shovel, pond liner and underlayment, a long enough rope, coping stones and decorations, plants, a pump (you will need a pump to run a filter, fountain, or waterfall and it will keep the water circulating and the plants healthy), a filter system and some cooperative friends or family members. Now you can get started.

Time to choose

Several options are available and you could actually build a goldfish pond in a day, depending on the size you want it to be. Begin by deciding where in the garden you would like a goldfish pond.

* It should be near your house, as that would make it more accessible to power supply sockets.

* It should not be at the end of a sloping garden because when it rains all the water along with the chemicals from the garden would run into the pond.

* It should not be under too much of shade, as a pond needs at least four hours of sunlight.

* It shouldn't be very near trees as the falling leaves and debris would fall in and clog the pond. You would be cleaning up all the time.

Time to dig

* Decide on the shape and size of the pond. Use the rope to outline the shape you want and then begin digging. That's why you need a couple of helping hands so that the work gets done faster!

* Do not go for a small pond for goldfish because they need space. Also try and keep different levels of depth, as in a swimming pool. Mark out the shallow areas and the deeper areas. This would give the pool a natural variety.

* Usually ponds in moderate climates should be at least 2 feet deep while in more colder climates, you would need to make sure that the pond is deep enough to allow for at least 12" to 16" of water below the freeze zone.

* Dig according to the shape you want and dig a shelf-like level around the perimeter of the pond, which is about one foot deep and one foot wide. Also make provisions for a waterfall by digging a slight slope to one end.

* Time now to position the external pond filters. If you have pond skimmers as well, then you would need to place and level these in the proper places. Also dig a ditch to the external pond pump from the skimmer and from the pump to the external pond filter or waterfall.

Time to line

* Now you have to line the pond with what is called as Pond Underlayment. This is a lining that can be cut according to the shape needed and can be taped together. This underlayment will help the pond lining to stay in place.

* You can now put the rubber pond liner into pond and spread it out.

* Make sure you smoothen the folds and position it evenly. Some folds will still be there but the water will take care of that.

Time for filters and waterfalls

* As the lining is in place, you must now get the Pond waterfalls and streams positioned. Place them to spill directly into the pond and put the pond liner against the pond filter.

* You can use a stone and secure it to the liner with mortar or expandable foam. This will hold back the water allow it to spill over the stone creating the waterfall.

Time to connect
Now you will have to do all the connections as in connect the pond liner to the skimmer and position all the pipes and tubing according to the instructions given.

Time to decorate

* You're almost done. Use the copingstones to edge the outline the pond by arranging them around the pond folding the pond liner up behind the stone, slightly above the water level. (Use the mortar to if you feel the stones are not heavy enough to be stable). Add some shrubs around the edges too.

* You can create a cobblestone beach edging with gravel and cobbles.

* Make it look as natural as possible and keep a lot of plants to add on later, once the water is in.

Fill it up!

* Open the tap and fill it up with water till it is a few inches from the top and then make corrections if necessary to ensure that the pond is level. As the pond is filling remove wrinkles and make folds as necessary.

* Add dechlorinator to the pond to remove any chlorine or chloramines.

* Put in the gravel and plant the root plants into the gravel or with some soil still attached into the gravel. Plants should be added immediately after the pond is ready. Make sure you plant enough of Anacharis, as this plant helps to fight the algae and is like a natural filter. Put in water lilies as they help to shade the fish.

* Also add packaged bacteria to seed the pond filter and pond.

Point to note: Do not add the goldfish right after you build the tank. You must allow the pond to cycle and create the bacteria and other sustenance needed to support the fish. Introduce you goldfish into the pond after several weeks.

Dane Stanton - www.goldfish-secrets.com [http://www.goldfish-secrets.com]


Goldfish Outdoors

Digital Thermometer Refrigerator Get It Now! Discount Hotel Collection Bargain Sale Kenwood Mixers

Sunday, November 13, 2011

Beckett 7104710 Waterfall and Stream Pump 1172gph

!: Promotion Beckett 7104710 Waterfall and Stream Pump 1172gph fast

Brand : Beckett Corporation
Rate :
Price : $79.52
Post Date : Nov 13, 2011 17:48:16
Usually ships in 24 hours



Beckett's waterfall and stream pump operates at 1,172 gallons per hour at a one foot lift. It features wet rotor, wet bearing technology, handles large particles, is energy efficient, has a water cooled motor, and quiet operation. The , oil less pump is designed for continuous operation, underwater use only, and includes a 16 foot cord.

Toro String Trimmer Best Quality Tips Gas Stoves And Ovens

Wednesday, November 2, 2011

Sunterra 200850 Pond Pump, 850 GPH, Black

!: Shop Sunterra 200850 Pond Pump, 850 GPH, Black discount

Brand : Sunterra
Rate :
Price : $54.02
Post Date : Nov 02, 2011 22:48:06
Usually ships in 24 hours



The pump is at the heart of a water garden. Without it, water will not circulate to create a healthy and balanced ecosystem. Sunterra pumps circulate water to help prevent breeding conditions for unwanted insects while oxygenating it for plants and fish. Pumps are distinguished by the gallons per hour they produce at one foot of lift or head. All Sunterra pumps are submersible and must be placed in water to function properly. Magnetic Pumps run by electrically charged magnet that causes the impeller to spin and circulate water through the pump. Magnetic drive pumps are environmentally safe, have no coolants and use less energy than direct drive pumps. They have a built in pre-filter and therefore can be used in clean or dirty water applications such as a fountain or pond. This Sunterra Pond Pump has a built in pre-filter to aid inthe water filtration process. Sunterra pumps are 100% water tested, have a 25 foot power cord and a two year limited warranty. This pond pump is 850 gallons per hour and has a 16.4 foot maximum lift.

Order Solar Panel 5v Cub Cadet Snow Throwers Ideas Digital Recorder Stereo Tutorial

Monday, October 24, 2011

Safely Installing Pond Waterfall Pumps

!: Safely Installing Pond Waterfall Pumps

Having pond waterfall pumps is essential in creating the effect and design of a waterfall in your garden pond. The device is essential in enhancing your landscaping, and makes your garden an inviting sight for everyone to see. However, in order to achieve this, it is essential to install the system in the safest possible way. The device need electricity to run the pump, and we all know the accidents that can happen once electricity comes into direct contact with the water.

There are simple requirements to safely install your pond waterfall pumps. The first is keeping the outlet at a safe distance from the water. If the outlet is far away for the pump's electrical cord to reach, make sure you use an outdoor extension wire. Outdoor extension cables are thick enough to prevent the copper wires from getting into direct contact with water, which is a disaster waiting to happen. This is also essential if you have living organisms in your manmade pond like fish and other aquatic animals. Since there are various capacities for these pumps, it will be best to only get a pump that fits the size of your pond. Strong pumps in smaller pond will result in water splashing all over the place, and this will be the cause of slips and other accidents. There is also a possibility for the water to splash and wet your outlet, which is another cause for concern. It will be vital to take these factors into careful consideration, if you want your waterfall to be a success.

Pond waterfalls are can make your pond the envy of neighbors and friends. It enhances the beauty of your home, and can be the topic of conversation. In addition, it also has a relaxing effect on the people who view it. However, no matter how masterful your design is, or how much money you put into the pond's construction, this will not matter if the whole setup is not safe. You do not want to put yourself at risk, and you do not want blood on your hands. It will be essential to safely install your pond waterfall pumps.


Safely Installing Pond Waterfall Pumps

Discount Electronic Piano Weighted Keys

Tuesday, October 18, 2011

Beckett 7107910 Pond Waterfall Pump 600gph

!: Promo Beckett 7107910 Pond Waterfall Pump 600gph discount


Rate : | Price : $58.58 | Post Date : Oct 18, 2011 23:33:08
Usually ships in 1-2 business days

This pump, by Beckett, is great for ponds, streams, and extra large fountains and waterfalls. It features new longer life wet rotor technology (no seals), passes larger particles, is designed for continuous duty, and is oil less. This energy efficient pump runs at 600 gph, is cool running, operates quietly, has a 16 foot, UL listed, three pronged cord with ground, and is safe for fish. Recommended for underwater use only, may be used horizontally or vertically.

Where To Buy Michael Kors Gunmetal Handbag

Saturday, April 16, 2011

How to Build a expert Pond and Waterfall

!: How to Build a expert Pond and Waterfall

Who wouldn't want to spend in a water highlight that will last for decades? If you are going to spend any thousand dollars on a waterfall and pond, don't you want it to be trouble free and add equity to your home? If so, then you do not want to cut corners by using a rubber liner, along with the with cheap plastic biofalls, filter, skimmer and power wasting sump pumps.

I have been building concrete and rebar reinforced rock waterfalls and ponds for over 25 years and have never had one crack or leak. Hundreds of "do-it-yourselfers" have expertly constructed their own water features with the help of my building Manual, and they will never have to worry about the high cost of maintenance that is a given when using a pond liner.

Pond liner contractors boast that their liners have twenty to thirty year warranties, depending on the maker of the liner itself. What they don't tell you is that the liner is warranted against premise defects only. They won't tell you that twenty to thirty percent of ponds built with liners leak within the first year from causes such as rats, Mice, ground squirrels, gophers, chipmunks, woodchucks, tree roots, stretching and punctures from heavy rocks placed on the liners, not to mention dogs, raccoons, and many other animals. The list goes on.

In addition, unlike the rocks that are secured with mortar in concrete constructions, pond liners are covered with loose rock, together with the building of the waterfall. Consequently, it presents a hazard for both children and adults who exertion to climb on the rocks. The loose rocks placed nearby the pond's edge and in the waterfall attract burrowing rodents, snakes and other animals. Because the rocks are not well-secured with mortar, as in concrete construction, they can in effect shift and communicate the unsightly liner underneath.

Liner ponds utilize gravity filters that need frequent cleaning; and this is a hard, messy and stinky job. Liner ponds also utilize sump pumps to circulate the water. Sump pumps use sixty percent more power than the centrifugal pumps that are used in concrete building and are regularly installed close to the edge of the pond. Consequently, they do not properly circulate the water, so all the fish waste and debris ends up collecting and rotting on the bottom, causing serious problems to the aquatic life. In addition, sump pumps have a short life span and most have only one or two-year warranties.

With concrete construction, two anti-vortex drains are installed in the center of the pond; so fish waste and other particulates gravitate to the drains and are sucked up and collected in a pressurized bead filter. This type of filter only requires the turning of a handle once or twice a week to back-flush the water, which insures a clean, crystal-clear pond.

Concrete ponds use expert pool skimmers to take off leaves and debris before it has a occasion to waterlog and decide to the bottom. Concrete building costs only twenty percent more than liner ponds and they will last for decades. With the proper instructions, any "do-it-yourselfer" can build their own water highlight by hiring expert subcontractors and ordering their own concrete company and rebar installers.

In as petite as one to two weeks, you can have a pond and waterfall that will last for decades and cost only twenty percent more than a leak-prone rubber liner pond. Plus, you will palpate a nearly maintenance-free water feature.


How to Build a expert Pond and Waterfall

!: Help Navy Camo Pants !: Kawai Pianos Right Now !: Mouse Laser Pointer

Saturday, April 9, 2011

Hwg175 Pond/waterfall Pump 175gph

!: The Top 10 Places to Buy Hwg175 Pond/waterfall Pump 175gph save

Brand : HAMPTON WATER GARDENS
Rate :
Price : $22.81
Post Date : Apr 09, 2011 08:12:46
Usually ships in 1-2 business days



Hampton Water Gardens - Submersible & Inline Utility Pump 160GPH

Designed Specifically for small to medium size ponds and statuary

Energy efficient magnetic drive

Inline or submersible u

!: Baby Crib Safety Ratings Tips Liver !: Vivitek Lamp Tips !: Information Poncho Beach Towels


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。